| base |
The base for the project |
.sldprt |
75 |
| main_shaft |
Main threaded support shaft (1/2 13) |
.sldprt |
61 |
| shaft1 |
Lowest part of support shaft |
.sldprt |
105 |
| shaft2 |
Second part of support shaft |
.sldprt |
142 |
| shaft3 |
Third part of support shaft |
.sldprt |
124 |
| thrust_bearing |
Thrust bearing in the support shaft |
.sldprt |
66 |
| holder |
Arm that holds the trays on the support shaft |
.sldprt |
105 |
| btmtray |
Bottom of the three trays |
.sldprt |
32 |
| intray |
The internal dividers of the three trays |
.sldprt |
41 |
| outtray |
The outside walls of the three trays |
.sldprt |
31 |
| servo_mount |
Mounting bracket for the servo motor |
.sldprt |
83 |
| lps |
The base for the Lateral Positioning System |
.sldprt |
40 |
| funnel |
The funnel used to position balls over the right square |
.sldprt |
42 |
| rail |
The slotted support for the funnel-holding wire |
.sldprt |
38 |
| lead_support |
End support for the lead screws |
.sldprt |
33 |
| lead_screw |
Lead screw for the Lateral Positioning System (1/2 13) |
.sldprt |
29 |
| stepper_support |
Support for the stepper motors |
.sldprt |
40 |
| dropper |
The base for the ball dropper |
.sldprt |
36 |
| holder_mount |
Mounts for the ball holders |
.sldprt |
33 |
| tray |
Assembly file of the tray |
.sldasm |
64 |
| tictacdoh |
Assembly file of the whole project |
.sldasm |
251 |
